Sign In | Join Free | My chinaqualitycrafts.com
China Changzhou Haozhuo Electronic Co., Ltd. logo
Changzhou Haozhuo Electronic Co., Ltd.
Changzhou Haozhuo Electronic Co., Ltd.
Verified Supplier

5 Years
Home > EMI Power Line Filter >

120 250VAC 1 Single Phase Emi Power Line Filter 16A Emc Interference Filter For Vfd

Product Categories
Changzhou Haozhuo Electronic Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

120 250VAC 1 Single Phase Emi Power Line Filter 16A Emc Interference Filter For Vfd

Model Number : HZ-16C-G

Place of Origin : China

Brand Name : nenglv

Supply Ability : 100 Piece/Pieces per Week

Packaging Details : 1 pcs in one carton the gross weight is about 20Kg

MOQ : >=1 Pieces

Price : $150.00

Certification : ce

Type : EMI Filter

Transfer Function : Low Pass

Package Type : Throught Hole

Nominal Center Frequency : 50/60Hz

3dB Bandwidth : 14K

Insertion Loss : 100dB

Input Impedance : 50ohm

Stopband Attenuation : 100dB

Rated Voltage : 120/250VAC

Rated Current : 16A 30A

Operating Frequency : 50/60Hz

Application : rf shielding room

Port : shanghai

Contact Now

250VAC 16A emi earth line filter rf shielding

Tips Related to EMI Filter Current Ratings
To determine the current rating requirements for a filter, consider the maximum current rating specifications for the system to which it is connected. This is the maximum root mean square (RMS) amperes or horsepower rating of the load that will be connected to the filter. If there is a breaker present, the filter must always be rated to meet or exceed the breaker rating.

You can connect some types of filters in parallel to achieve higher current ratings. For this approach to work, you need to use identical filter models, and the connection must allow the filters to share the current equally. Be sure to follow the National Electric Code (NEC) and all local electrical codes throughout the process.

Product Description
RATED VOLTAGE 250 VAC
RATED CURRENT 30 A
OPERATIONAL FREQUENCY 50 60 Hz
Voltage Drop Less than 1V
Overload 140% of rated current for 15 minutes
Harmonic Distortion Less than 2% @ full rated current
Leakage Current ≤0.2A@380/230VAC and 50Hz
Dielectric Withstanding Voltage 1000VDC (line to line) 1000VDC (line to case)
DC Insulation Resistance As Per MIL-STD-202 Method 202
Terminal Strength As Per MIL-STD-202 Method 211
Temperature Rise As Per MIL-F-15733
Insertion Loss ≥100dB@14K-40GHz As Per MIL-STD-220A, Under Load Condition
Climatic Classification 25/070/21

  • Aim to keep power and control wiring separated. Ensure that power and control wires do not run parallel. If cables must cross, ensure that cables cross at or as close to a right angle as possible.
  • Route the conductors as close to the panel as you can.
  • Ensure that the filter input and output conductors are separated.
  • Keep input and output leads separated.
  • Use shielded wiring if necessary, especially, on the side that needs to be protected from the radiated noise.

Ensure that the shield of shielded cables is terminated at both ends.


Product Tags:

1 single phase emi filter

      

120v Ac Emi Filter

      

single phase emi filter 16A

      
Quality 120 250VAC 1 Single Phase Emi Power Line Filter 16A Emc Interference Filter For Vfd for sale

120 250VAC 1 Single Phase Emi Power Line Filter 16A Emc Interference Filter For Vfd Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Changzhou Haozhuo Electronic Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You May Like